<%@LANGUAGE="VBSCRIPT" CODEPAGE="65001"%> Jaw crusher operation for material blocking, Jaw crusher repair solutions -- Mining machinery manufacturers Vipeak
Home About Us News Stone Crusher mobile crusher International Trade Service Contact Us

Jaw crusher operation for material blocking, Jaw crusher repair solutions
Jaw crusher operation:
When crushing materials blocking, there are some basic requirements for crusher operation.For example the jaw crusher,if customer need crushing the sulfide ore, because of the inclusions like mud and the other mixture material may exist inside of the raw material, or temperature of the material beening too high, resulting in the material in crushing process too viscous, thereby causing clogging of the crushing chamber. So, before crushing materials must be to ensure the dryness of the material, but also to ensure that the material have not too much mixture. Same time to strengthen the jaw crusher plate life proceed from the design,material selection, assembly, use process improvement,it will strengthen the broken jaw crusher plate life very well, thereby enhancing the jaw crusher production efficiency, reduce production and jaw crusher repair costs.
Jaw crusher operation and repair for material blocking
The main reason for crusher blocking and stop crushing is that there is too much accumulation of material in the lower chamber of the crusher and could not be put down, withstood the moving cone, resulting in motor overload stop jumping. Usually there are two circumstances cause to stop crushing: the first is the crusher high yield, belt conveyor late put material away; the second is downstream equipment stop working,but crusher continue crushing. This case occurred, must put the crushing cavity materials all out to continue to boot up, time-consuming and generally must be at least 3 to 4 hours to complete.
Jaw crusher repair:
In order to prevent the material blocking of jaw crusher, Zhengzhou Vipeak Heavy Industry Machinery Co., Ltd. Technical Department engineers summed up the reason of the occurrence of this problem and to develop a reasonable solution:the use of sound and light indicator instructions feeding.Since the use got a good evaluation.Installed bells and flashing lights in the jaw crusher feed mouth.The bells began to ring when the conveyor electric current exceeds the set current value; if other devices in the equipment package there is a problem, then the conveyor electric current is zero, bells and flashing lights will have the appropriate prompt also. Workers prompted by the bell and stop feeding, so you can easily prevent the phenomenon of blocking material. This method is simple, easy to operate, low cost, and can greatly reduce the labor intensity and improve the production of the jaw crusher.
Customer satisfaction is our pursuit --- Zhengzhou Vipeak Heavy Industry Machinery Co., Ltd
(Author:Becky Yang)
Corporation News
Product Knowledge
Brief Introduction Of Our Company
International Trade
Corporation Culture
Scientific Research and Development
After-Sales Service
Tel(Shanghai): 0086-21-51382188  E-mail: vipeak@vipeakgroup.com
Tel(Zhengzhou): 0086-371-67771000  E-mail: info@vipeak.com
Vipeak Heavy Industry Machinery Co., Ltd.